Cisco Catalyst 4500 Series Software Configuration Manual page 65

Configuring Ethernet CFM Crosscheck
Configuring Static Remote MEP
Configuring a Port MEP
Configuring SNMP Traps
Configuring Fault Alarms
Configuring IP SLAs CFM Operation
Manually Configuring an IP SLAs CFM Probe or Jitter Operation
Configuring an IP SLAs Operation with Endpoint Discovery
Configuring CFM on C-VLAN (Inner VLAN)
Feature Support and Behavior
Platform Restrictions and Limitations
Understanding CFM ITU-T Y.1731 Fault Management
Y.1731 Terminology
Alarm Indication Signals
Ethernet Remote Defect Indication
Multicast Ethernet Loopback
Configuring Y.1731 Fault Management
Default Y.1731 Configuration
Configuring ETH-AIS
Using Multicast Ethernet Loopback
Managing and Displaying Ethernet CFM Information
About Ethernet OAM Protocol
OAM Features
75-34
OAM Messages
75-34
Enabling and Configuring Ethernet OAM
Ethernet OAM Default Configuration
Ethernet OAM Configuration Guidelines
Enabling Ethernet OAM on an Interface
Enabling Ethernet OAM Remote Loopback
Configuring Ethernet OAM Link Monitoring
Configuring Ethernet OAM Remote Failure Indications
Configuring Ethernet OAM Templates
Displaying Ethernet OAM Protocol Information
Ethernet CFM and Ethernet OAM Interaction
Configuring Ethernet OAM Interaction with CFM
Configuring the OAM Manager
Enabling Ethernet OAM
Example: Configuring Ethernet OAM and CFM
75-11
75-13
75-14
75-16
75-16
75-18
75-24
75-26
75-26
75-27
75-28
75-28
75-29
75-29
75-29
75-29
75-31
75-33
75-35
75-35
75-35
75-36
75-37
75-38
75-45
75-49
75-51
75-52
75-52
75-53
Software Configuration Guide-Release IOS XE 3.9.xE and IOS 15.2(5)Ex
75-19
75-21
75-27
75-31
75-42
75-51
Contents
61