Cisco Catalyst 4500 Series Software Configuration Manual page 17

Module Modes on WS-X4748-12X48U+E Overview
Restrictions for Multigigabit Ports
Supported Cable Types and Speed
Supported Hardware and Power Supply
Configuring Module Modes on WS-X4748-12X48U+E
Upgrading the Line Card FPGA Image on WS-X4748-12X48U+E
Invoking Shared-Backplane Uplink Mode on
Supervisor Engine 6-E and Supervisor Engine 6L-E
Limitation and Restrictions on Supervisor Engine 8-E
Limitation and Restrictions on Supervisor Engine 7-E and Supervisor Engine 7L-E
Selecting Uplink Mode on a Supervisor Engine 6-E
Support for WS-X46490-CSFP-E on a 10-slot Chassis
Configuring Supervisor Engine 7-E Uplink Mode on Supervisor Engine 8-E
Supervisor Engine 7-E Mode on Supervisor Engine 8-E
Supervisor Engine 8-E with Daughter Card Enabled
Supervisor Engine 8-E Uplink Configurations
Restrictions for Configuring Sup 7-E Uplink Mode on Supervisor Engine 8-E
Configuring Supervisor Engine 7-E Mode on Supervisor Engine 8-E
Selecting the Uplink Port on a Supervisor Engine 7L-E
Single Supervisor Mode
Redundant Supervisor Mode
Digital Optical Monitoring Transceiver Support
Configuring Optional Interface Features
Configuring Ethernet Interface Speed and Duplex Mode
Speed and Duplex Mode Configuration Guidelines
Setting the Interface Speed
Setting the Interface Duplex Mode
Displaying the Interface Speed and Duplex Mode Configuration
Adding a Description for an Interface
Configuring Flow Control
Configuring Jumbo Frame Support
Ports and Modules That Support Jumbo Frames
Jumbo Frame Support
Configuring MTU Sizes
Interacting with Baby Giants
Configuring the Port Debounce Timer
Configuring Auto-MDIX on a Port
Displaying the Interface Auto-MDIX Configuration
Understanding Online Insertion and Removal
9-16
9-17
9-17
9-17
9-19
9-19
9-20
9-22
9-22
9-25
9-25
9-26
9-26
9-27
9-28
9-30
9-32
9-32
9-34
9-35
9-37
9-37
9-38
9-39
9-41
Software Configuration Guide-Release IOS XE 3.9.xE and IOS 15.2(5)Ex
9-18
9-18
9-20
9-21
9-22
9-22
9-24
9-24
9-27
9-27
9-30
9-34
9-40
Contents
13