Cisco Catalyst 4500 Series Software Configuration Manual page 631

Chapter 17 Configuring VLANs, VTP, and VMPS
This example shows how to disable VTP on the switch:
Switch# configure terminal
Switch(config)# vtp mode transparent
Setting device to VTP TRANSPARENT mode.
Switch(config)# end
Switch#
This example shows how to disable VTP on the switch and to disable VTP advertisement forwarding:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# vtp mode off
Setting device to VTP OFF mode.
Switch(config)# end
Switch#
This example shows an example of the VTP configuration parameters when the device is running VTP
version 1:
Switch# show vtp status
VTP Version capable
VTP version running
VTP Domain Name
VTP Pruning Mode
VTP Traps Generation
Device ID
Configuration last modified by 127.0.0.12 at 10-18-07 10:12:42
Local updater ID is 127.00.12 at 10-18-07 10:2:42
Feature VLAN:
--------------
VTP Operating Mode
Maximum number of existing VLANs : 5
Configuration Revision
MD5 digest
Switch#
This example shows an example of the VTP configuration parameters when the device is running VTP
version 2:
Switch# show vtp status
VTP Version capable
VTP version running
VTP Domain Name
VTP Pruning Mode
VTP Traps Generation
Device ID
Configuration lst modified by 127.0.0.12 at 10-18-07 10:38:45
Local updater ID is 127.0.0.12 on interface EO 0/0 (first interface found)
Feature VLAN:
--------------
VTP Operating Mode
Maximum VLANs supported locally: 1005
Number of existing VLANs
Configuration Revision
MD5 digest
Switch#
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
: 1 to 3
: 1
: Lab_Network
: Enabled
: Disabled
: 0016.9c6d.5300
: Server
: 1
: 0x92 0xF1 0xE8 0x52 0x2E ox5C 0x36 0x10 0x70 0x61 0xB8
0x24 0xB6 0x93 0x21 0x09
: 1 to 3
: 2
: Lab_Network
: Disabled
: Disabled
: 0012.44dc.b800
: Server
: 1005
: 1
: 0x2E 0x6B 0x99 0x58 0xA2 0x4F 0xD5 0x150x70 0x61 0xB8
0x24 0xB6 0x93 0x21 0x09
VLAN Trunking Protocol
17-17