Daikin R410As Service Manual page 207

Troubleshooting by Indication on the Remote Controller
Troubleshooting
196
Be sure to turn off power switch before connect or disconnect connector,
Caution or parts damage may be occurred.
Are the
connectors
between the main
PC board (A1P),
fan drive PC board (A3P)
and inverter PC board
(A2P) connected
securely?
YES
The
transmission
wiring between the
outdoor unit PC board,
fan drive board and
inverter unit is
disconnected.
NO
The
microcomputer
monitor (green) on
fan drive board is
blinking.
YES
The
microcomputer
monitor (green) on
the inverter P.C.B
is blinking.
NO
The voltage
between red and
white of X1A on the inverter
unit is 220 ~ 240 V.
NO
NO
YES
NO
YES
YES
Si39-302
Connect transmission wiring and
turn on again.
Fix the disconnection and turn on
again.
Check connection of the connector.
Defect of outdoor main PC board
or defect of inverter PC board.
Replace inverter PC board.
When the LC malfunction occur
again, replace control PC board.
Check the noise filter (Z1F) for
disconnection, and check the
power supply wiring or the inverter
PC board.
(V2815)
Troubleshooting