Omron CJ1W-PRT21 Operation Manual page 91

Error Program-
ming
Console
display
Special I/O SIOU
Unit Setup SETUP
error ERR
System SYS FAIL
FAL error FAL
72
Error Flag and
code (in word data
A400)
0500 to A40202: An installed Special I/O Unit
does not match the Special
055F Special I/O
Unit Set- I/O Unit registered in the I/O
ting Error table.
Flag
The corresponding flag in
A428 to A428 to A433 will be ON.
A433: Spe- Bits A42800 to A43315 cor-
cial I/O Unit respond to Machine num-
Setting bers 0 to 95.
Error,
Machine
number
Flags
4101 to A40215: FAL(006) has been exe-
42FF FAL Error cuted in program.
Flag
Executed FAL Number
A360 to Flags A36001 to A39115
A391: Exe- correspond to FAL num-
cuted FAL bers 001 to 511.
Number
The error code in A400 will
Flags
indicate the FAL number.
The leftmost digit of the
code will be 4 and the right-
most 3 digits of the code will
be from 100 to 2FF Hex and
will correspond to FAL num-
bers 001 to 511.
Probable cause
Change the registered I/O table.
Correct according to cause indicated by
FAL number (set by user).
Appendix
Possible remedy