Support - Dell S3840cdn User Manual

LDAP
• When LDAP is turned on
You can set the LDAP server settings in the LDAP Server screen.
Test Connection
Server Address
SSL/TLS
Directory Root
User Name
Password
Find Other LDAP Servers
LDAP Communication
Report
• When LDAP is turned off
Wait until the desired server is found, and select the server.
To specify the server by manually entering the server information, select Manual
Setup.
SMTP
Setup the SMTP server.
Once this screen is opened, searching SMTP server starts automatically. Select a server
from the search result.
Also you can specify the SMTP server by entering the server address manually.
NOTE:
• If SMTP is already enabled, the search is not performed automatically and the SMTP Server screen
is displayed.

Support

Displays the menu for maintenance of the machine.
Support Pages
Allows you to print reports.
• Ghosting Print
• Repeating Defects
• System Status
• Error History Report
• LDAP Communication Report
• SMB Communication Report
• SMTP Communication Report
To test the connection to the server, select Test Connection.
Initially Not Tested is displayed. Success or Failed is displayed
as a result of the test.
Sets the server address.
To encrypt the communication between the server and the printer,
enable SSL/TLS.
Sets the directory root.
Enter the login name for searching in LDAP server.
Enter a password for the user specified in User Name.
Opens the LDAP server list.
Outputs the report that shows the contents of the LDAP
communication transmitted and received by the machine.
65
Device |