Dell S3840cdn User Manual page 195

Status Code
091-445 Drum cartridges need to be replaced very soon. Replace the drum cartridges.
091-446 Drum cartridges need to be replaced. Replace the drum cartridges.
091-480 Replace the drum cartridges.
091-481
091-482
091-911 Replace the waste toner box.
091-913 Replace the drum cartridges.
091-914 Ensure that the drum cartridge (black) is installed correctly.
091-915 Replace the drum cartridges.
091-916 Ensure that the drum cartridge (black) is installed correctly.
091-917 Ensure that the drum cartridge (yellow) is installed correctly.
091-918 Ensure that the drum cartridge (magenta) is installed correctly.
091-919 Ensure that the drum cartridge (cyan) is installed correctly.
091-920 Replace the drum cartridges.
091-921 Ensure that the drum cartridge (black) is installed correctly.
091-922 Replace the drum cartridges.
091-923
091-924
091-925
091-926
091-927 Ensure that the drum cartridge (yellow) is installed correctly.
091-928 Ensure that the drum cartridge (magenta) is installed correctly.
091-929 Ensure that the drum cartridge (cyan) is installed correctly.
"092-001" - "092-999"
Status Code
092-316 Temperature sensor detected abnormality. Turn off the printer, and turn it on again.
Contact customer support if this failure is repeated.
092-318 Density of Yellow color is low. Turn off the printer, and turn it on again. If the same
message is displayed again, pull out the drum and toner cartridges of that color, and then
insert them again. Turn off the printer, and turn it on again.
Contact customer support if this failure is repeated.
092-319 Density of Magenta color is low. Turn off the printer, and turn it on again. If the same
message is displayed again, pull out the drum and toner cartridges of that color, and then
insert them again. Turn off the printer, and turn it on again.
Contact customer support if this failure is repeated.
092-320 Density of Cyan color is low. Turn off the printer, and turn it on again. If the same message
is displayed again, pull out the drum and toner cartridges of that color, and then insert
them again. Turn off the printer, and turn it on again.
Contact customer support if this failure is repeated.
092-321 Density of Black color is low. Turn off the printer, and turn it on again. If the same message
is displayed again, pull out the drum and toner cartridges of that color, and then insert
them again. Turn off the printer, and turn it on again.
Contact customer support if this failure is repeated.
Cause and Remedy
Cause and Remedy
Understanding Printer Messages
195
|