View Wireless Settings
Under this tab, you can view the wireless settings of EAP.
iipe
To change the wirless settings, you can refer to
Ntte
For a dual-band EAP, there are two bands: 2.4GHz and 5GHz. You can click to select a band to
·
view.
The following figure posted in the introduction takes 2.4GHz as an example.
·
The following wireless information is displayed:
Channel/
Frequency
Channel Width
IEEE802.11 Mode
Max TX Rate
View LAN Information
Under this tab, you can view the LAN information of EAP.
Displays the channel and frequency which are currently used by the EAP.
Displays the channel width which is currently used by the EAP.
Displays the IEEE802.11 protocol currently used by the EAP.
Displays the maximum physical rate of the EAP.
54
Configure the Wireless Parameters
.