Backup Logs (For Eap320/Eap330/Eap225); Configure Web Server - TP-Link EAP110 User Manual

 Server
If Server is configured, system logs will be sent to the specified system log server, and
you can use the syslog software to view the logs on the server.
Enable this feature and enter the IP address and port of the system log server.
 Nvram
Nvram (Non-volatile Random Access Memory) is a RAM that can still save data even if
a device is power off. With this option enabled, the Nvram feature can help reserve the
system logs when the EAP is power off.
2. Click Save.

Backup Logs (For EAP320/EAP330/EAP225)

In the Backup Log section, you can click
file and save the file on your local host.

4.2 Configure Web Server

With the web server, you can log in to the management web page of the EAP. You can
configure the web server parameters of the EAP according to your needs.
to backup the current system logs into a
65