TP-Link EAP110 User Manual page 35

Portal
Customization
3. Click Save.
4. Go to the Wireless > Wireless Settings page and enable the Portal option for the
specific SSID. Then the portal authentication feature will take effect on this SSID.
· Local Password
With this authentication type configured, clients are required to provide the correct
password to pass the authentication.
Follow the steps below to configure Local Password as the portal authentication type:
1. Select Local Password as the authentication type.
2. Configure the relevant parameters as the following table shows:
Configure the authentication page. Local Web Portal is the only available
option in this authentication type. Enter the title and term of use in the two
boxes.
The EAP uses its built-in web server to provide this authentication page for
clients. To pass the authentication, clients only need to check the box of I
accept the Term of Use and click the Login button.
31