Wireless; Wireless Settings - TP-Link TL-WA901N User Manual

Chapter 4
4. 4.
4. 4. 1.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to
3. Four operation modes are supported here, including
Range
Access Point Mode
• Wireless Network Name
32 characters and make sure all wireless points in the wireless network with the same
SSID. The default SSID is TP-LINK_AP_XXXX (XXXX indicates the last unique four
characters of each device's MAC address). This value is case-sensitive. For example,
TEST is NOT the same as test.
• Channel
change the wireless channel unless you notice interference problems with another
nearby access point.
• Mode
•
•
•
•
•
• Channel Width
the default value unless required.
Downloaded from ManualsNet.com

Wireless

Wireless Settings

Wireless > Wireless Settings.
Extender.
- Identifies your wireless network name. Create a name up to
- Determines the operating frequency to be used. It is not necessary to
- Select the desired wireless mode. The options are:
11b only - Only 802.11b wireless stations can connect to the device.
11g only - Only 802.11g wireless stations can connect to the device.
11n only - Only 802.11n wireless stations can connect to the device.
11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the
device.
11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect
to the device.
- Determines the channel width to be used. It is unnecessary to change
search engine
Configure the Access Point
Access Point, Multi-SSID, Client, and
23