TP-Link EAP110 User Manual page 44

Follow the steps below to configure Scheduler on this page:
1. In the Settings section, check the box to enable Scheduler and select the Association
Mode. There are two modes: Associated with SSID (the scheduler profile will be applied
to the specific SSID) and Associated with AP (the profile will be applied to all SSIDs on
the EAP). Then click Save.
2. In the Scheduler Profile Configuration section, click
page will appear.
1 ) Click
can create up to eight profiles.
and specify a name for the profile to be created. Click OK. You
40
and the following