TP-Link EAP110 User Manual page 68

Ntte
SSL encryption is not currently supported.
The following table introduces how to configure these parameters:
From
To
SMTP Server
Enable
Authentication
Time Mode
Fixed Time
Period Time
Enter the sender's E-mail address.
Enter the receiver's E-mail address.
Enter the IP address of the sender's SMTP server.
Note: At present, the domain name of SMTP server is not supported in
this field.
If the sender's mailbox is configured with You can check the box to
enable mail server authentication. Enter the sender's username and
password.
Select Time Mode: Fixed Time or Period Time.
Fixed Time means that the system logs will be sent at the specific time
every day. Period Time means that the system logs will be sent at the
specific time interval.
If you select Fixed Time, specify a fixed time to send the system log
mails. For example, 08:30 indicates that the mail will be sent at 8:30 am
everyday.
If you select Period Time, specify a period time to regularly send the
system log mail. For example, 6 indicates that the mail will be sent every
six hours.
64