Setting Up The Language Selection Using The Multilanguage User Interface (Mui); Setting Up The Language Selection In Windows 7 - Siemens SIMATIC ITP1000 Operating Instructions Manual

5.4.7

Setting up the language selection using the Multilanguage User Interface (MUI)

5.4.7.1

Setting up the language selection in Windows 7

You can set the display of menus, dialogs or other information, such as date and time, to a
different language. For this purpose, you can either select one of the preinstalled languages
or install a new language package.
The following command sequences are described in English. Depending on the default
setting, they can be displayed in another language.
Note
Specific information for setting up the language selection for Windows operating systems is
available on the Internet:
• Microsoft Technet Windows (http://technet.microsoft.com/windows)
The respective manuals are not included in the scope of delivery.
Changing the settings for language, region and formats of a registered user account
1. Choose:
"Start > Control Panel > Clock, Language, and Region > Region and Language"
2. You can make the desired changes in the "Formats", "Location" and "Keyboards and
Languages" tabs.
Changing the settings for language, region and formats of the system account and the standard user
account
You can change the settings for language, region and formats of the system account (for
example, the language in the user login dialog) and the settings of the standard user account
(standard setting for new users). The settings of the registered user are copied to the system
account and the standard user account for this purpose.
1. Choose:
"Start > Control Panel > Clock, Language, and Region > Region and Language"
2. You can make the required changes in the "Administrative" tab. You copy the settings by
clicking the respective button.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Device maintenance and repair
5.4 Reinstalling the software
65