Reinstalling The Operating System - Siemens SIMATIC ITP1000 Operating Instructions Manual

5.4.2

Reinstalling the operating system

If your operating system is not responding correctly, you can reinstall it in one of two ways:
● With the recovery function of the supplied USB stick
● With the restore function of the supplied USB stick
For these functions, set up the USB stick as bootable. For this purpose, "USB Boot" must be
set to "enabled" in the BIOS Setup.
Note
To install an operating system in UEFI mode, the USB stick must also be booted in UEFI
mode.
To do this, launch the Boot Manager in the BIOS selection menu, see section "Opening the
BIOS selection menu (Page 84)".
Recovery function
The supplied USB contains the installation program with tools for configuring the drives and
installing the operating system with the supported languages.
The basic language of the installed operating system is English. To add other languages,
install these languages from the supplied USB stick at a later time (directory
"Languagepacks").
Restore function
If you have ordered a device with operating system, the Restore function is included on the
USB stick.
Documentation and drivers
The supplied USB stick contains the directory "DocuAndDrivers". You can find the
documentation, hardware drivers and updates here:
In Windows, these contains are available via a menu.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Device maintenance and repair
5.4 Reinstalling the software
59