Siemens SIMATIC ITP1000 Operating Instructions Manual page 85

2. Press <ESC> to open the BIOS selection menu:
The following keys are available in the BIOS selection menu:
1
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Buttons Function
Continue Exit selection menu, continue start sequence
Boot Manager Specify the boot media from which to boot:
•
•
Device Management Start device manager for UEFI boot media
Boot From File Boot Maintenance Manager:
•
•
•
•
•
Secure Boot Option Configuration settings to start the device in Secure Boot mode. The only
1
software modules loaded are those that are known to be safe for the
BIOS or the operating system.
SCU Start BIOS Setup via Setup Configuration Utility
BIOS Update Update BIOS from USB flash drive
MEBx Intel Management Engine AMT configuration
Available as of Windows 8 or later
Hard disk drive
USB drive (USB boot = enabled)
Boot Options: Set boot order
Driver Options: Configure drivers
Console Options: Configure connected input device
Boot from File: Start from an ".EFI" file
Reset System: Restoring factory settings
Technical specifications
6.6 BIOS description
85