3. Open the battery cover by folding back from edge of device toward middle of device and
place the battery cover with the attached battery on a flat surface.
4. Remove the two battery screws
removed screws
5. Fasten the new battery to the battery cover with the two battery screws
6. Insert the new battery with the battery cover, as shown, at an angle from above
then lower it
7. Close the battery cover and fasten it with the two remaining screws
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
②
and store these separately from the two previously
①
.
④
.
Device maintenance and repair
5.3 Installing and removing hardware
②
.
①
.
③
and
55