Installing Or Changing The Password - Teledyne 3020T Operating Instructions Manual

Trace Oxygen Analyzer
The screen prompts you to enter the current password. If you are
not using password protection, ENTER to accept TETAI as the default
password. If a password has been previously installed, enter the
password using ENTER to scroll through the letters, and the DOWN/UP
keys to change the letters to the proper password. The last ENTER
enters the password.
If the password is accepted, the screen will indicate that the
password restrictions have been removed and you have clearance to
proceed.
In a few seconds, if you do not ESCAPE, you will be given the
opportunity to change this password or keep it and go on.
ESCAPE to move on, or proceed as in Changing the Password,
below.

4.4.2 Installing or Changing the Password

If you want to change the existing password: Proceed as above in
Entering the Password, until you are given the opportunity to change the
password:
ENTER to change the password (to change either the default TETAI
or the previously assigned password), or ESCAPE to keep the existing
password and move on.
If you choose ENTER to change the password, the password
assignment screen appears.
Teledyne Analytical Instruments
A A A A A
Enter PWD
PWD Restrictions
Removed
Change Password?
<ENT>=Yes <ESC>=No
Change Password?
<ENT>=Yes <ESC>=No
T E T A I
<ENT> To Proceed
or
Operation
39