Sony SLV-D100 Operating Instructions Manual page 88

Dvd player/video cassette recorder

Hide thumbs Also See for SLV-D100:

When connecting the DVD-VCR to the TV

using only the antenna cable, you must set

the RF Output channel in the "OPTION

SETUP" menu so that the TV can receive the

correct signal from the DVD-VCR.

Set the RF Output channel to "WE-I" or "KH"

(see page 87 to set the channel),

whichever channel is not used in your area. If both are used, set the switch to

either channel.

Press i/O to cum on the DVD-VCR.

Press CH +I- to display a chamei number in the display window.

Select an active channel number in your area.

Turn on your TV and set it to the channel you selected in step I (3X-I or 4CH).

The channel you selected in step 4 appears on tbe TV screen. If the channels

change when you press CH +I-. you have made the cossect setting.

Whenever you use the DVD-VCR, set the TV to the channel selected in step 1.

8 General setup

information