Sony SLV-D100 Operating Instructions Manual page 42

e recording, press SELECT VTDEB and then press
In step 4 above, press
attern. Each time you press
indication changes as own below. Press to change the indication in rever
--e 1 month later - (
se th
When you are recording a gram in the AUTO mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the EP mode. Note that some noise wili appear on the picture when the tape speed is
changed. If you want to keep the tape speed, select SP. To operate this function, set
"'Fape Length" in "VIDEO FUNCTlON SETUP" menu correctly (page 84).
er T ram after set@
P1-ess TV/VIDEO to display "TV" in the dis
If your TV is connected 10 the VCR using A/V connections, set the TQ to the
'N's antenna input; if nor, skip this step.
Select another channel on the TV.
fter s
8"
Press SELECT DVD to control the DVD player.
and place the disc on the disc tray.
Press D PLAY.
The disc tray closes and
the
DVD player starts playback. The TV screen will
automaiicaliy change co the DVD playback screen.
To set the channel. yott can aiso use the t/+ or nmiber but&xx
If the IjJ indicator appears, the timer setting:: overlap. To check, change or cancel the program
setiing, repeat ,Ae steps of "Recording TV programs using ihe timer" on page 40.
If the 0 indicator appears. this means that the VCR is cumentiy recording this program.
You can also do the following tasks whiie the VCR is recording:
-Reset the counter (page 36).
-Display tape informatior~ on rhe TV screen (page 38).
42 Recording TV programs using the timer