Sony SLV-D100 Operating Instructions Manual page 50

to select the setup item from the displayed list:
&al," '?YKS," or "Audio DRC."
Press to select an item. then press
RETURN
Press
RETURN repeatedly to exit the menu.
RETURN
ices
@ Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
1 Iacking a buiit-in Dolby Digital decoder.
Seiect this when the player is connecred to an audio component
v&h a built-in Dolby Diyital decoder.
Selects whether or not to ouiput DTS signals.
The default setting is indicated in bold print.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
on
Select this when the player is connected to an audio component
with a built-in DTS decoder.
I
* Audio DKC (Dynamic Range Control) (DVD only 1
M&es the sound clear when the volume is turned down when playing a END that
confoms to "',&die DK." This affecrs the output from the following jacks:
- LINE OUT AUDIO L/R jacks
- DIGITAL AUDIO OUT ~OPTICAL or COAXIAL) jack only when "Dolby
Digital" is set to '2sPaw'.
The default setting is
indicated in bold print.
TV rvlode
Makes the lov\' sounds ciear even if you turn the volume down.