Sony SLV-D100 Operating Instructions Manual page 39

Press TV/VIDEO to display "TV" in the dis
If your TV is connected to the VCR using AN connections, set the TV to the
TV's antenna input; if not, skip this step.
Select another
channel
on the TV.
Press SELECT DVD to connroi tl-ie DVD player.
and place the disc on the disc tray.
The disc tray closes and the DVD player stats playback. The TV screen will
automatically change to ike DVD piayback screen.
To prevent accidental erasure, break
off the safety tab as illustrated. To
record on
the cape again, cover the tab
hole with adhesive tape.
Tips
5 To select a channel, you can use nhe
number buttons on the remote commander. Enter tine channel number. rher! press ENTER.
5 You can selecr a video source from the LINE iN I or LTNE-2 IN jacks tying the lNPlJT
SELECT bution.
= The display appears on the TV screen indicating information about the tape, hut the
infbrmaiion will not be recorded on the tqx.
0 If you do not want lo watch TV while recording. you can turn 08 the TV, W&en using a cable
box, make swe to leave ir on.
&eta
0 The remaining tape length may not be indicated acctxately for &opt tapes such as T-20 or
T-30,
or tapes recorded in Ihe LP mode.
e The display does not appear during stiii (patrsc) mode or siow-motion playback.
0 It may take up to one minute for the VCR to calculate and dispiay the remaining tape length
affer you press CWLAY.
- You cannot record a DVD to a VCR tape.
* To watch a TV program during video recording, stop disc playback.
Recorcling TV programs 39