Sony SLV-D100 Operating Instructions Manual page 32

Tip
* You can listen to the sound during
x
2 fast forw'ard playback. However, you cannot listen to
DTS (Only Digital Out) and LPCM sound.
oh?
- You can change the screen type using the "SCREEN SETUP" menu. (See "Screen Setup" on
page 52)
* Do not perform VIDEO playback while playing back a disc.
* The VIDEO CD playback speed changas as follows.
x4+x8
0 You cannot change the CD or DATA-CD playback speed.
When playing TITS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system. the consumer should take proper precautions
when the analog stereo jacks oftbe DVD player are connected to an amplification system. To
enjoy DTS Digital Surrounded playback, an external 5.1.channel decoder system must be
connected to the digital jack of the DVD player.
Set the sound to "STEREO" using the AUDIO button when you play DTS sound tracks on a
CD (page71).
Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if "DTS" is set to
"Of?
in
"AUDIO SETUP" menu (page 50), and may affect your ears or cause your speakers to bc
damaged.
otes cm pkyin
% with a
e DTS audio signais 'are output only through the DIGITAL AtJDIO OlJT (CO.AXIAL or
OPTICAL) jack.
0 When you play a DVD with DTS sound tracks. set "DTS" to Y)n" in "AUDIO SETUP'
menu (page 50).
e If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to
"On" in "AUDI0 SETUP" menu (page 50). A loud noise may come out from the speakers:
affecting your ears or causing the speakers to be damaged.
* "DTS' and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
32 Playing discs