Sony SLV-D100 Operating Instructions Manual page 17

The DVD-VCR automatically psesets the DVD-VCR's clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 21.
The clock is set using a time signal provided by some
TV channels. If the clock
is incorrect, or "--:--" appears in the display window, see "Using Manual CIock
Set" on page 24.
To add or disable channels manually, see "~resettingldisa~iing channels
manually" on page 28.
if you connect the AC power cord bei'ore the antenna connections are completed,
ihe
channels
may be incorrectly set. If this happens: see "Step 6 : Presetting channels" on page 16.
e Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
e Auto preset starts automatically only when you ping in the AC power cord for the first rime
after you purchase the DVD-VCR.
- Auto preset can be performed by pressing
STOP continuously for 5 seconds or more with
the DVD-VCR power turned OK
contsnue
Basic hookups j 17