Sony SLV-D100 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD VCR Combo
  5. SLV-D100 Notes on operations & the setup...
  6. Service manual
Sony SLV-D100 Service Manual

Sony SLV-D100 Service Manual

Sony slv-d100 dvd player/ video cassette recorder
Hide thumbs Also See for SLV-D100:
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0
SERVICE MANUAL
TE
L 13942296513
System
Laser
Semiconductor laser
Format
VHS NTSC standard
Video recording system
Rotary head helical scanning FM system
Video heads
Double azimuth four heads
Video signal
NTSC color, EIA standards
Tape speed
3
SP: 33.35 mm/s (1
inches/s)
8
7
EP: 11.12 mm/s (
inches/s)
16
11
LP: 16.67 mm/s (
inches/s),
16
playback only
Maximum recording/playback time
8 hrs. in EP mode (with T-160 tape)
Rewind time
Approx. 1 min (with T-120 tape)
Tuner section
Channel coverage
VHF 2 to 13
UHF 14 to 69
CATV A-8 to A-1, A to W, W+1 to W+84
Antenna
75-ohm antenna terminal for VHF/UHF
www
.
http://www.xiaoyu163.com
Audio characteristics
Frequency response
DVD VIDEO (PCM 96 kHz): 2 Hz to 44 kHz (±1.0
dB)/DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio)
115 dB (LINE OUT (L/R) AUDIO jacks only)
Harmonic distortion
0.003 %
Dynamic range
DVD VIDEO: 103 dB/CD: 99 dB
Wow and flutter
Less than detected value (±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO) jacks are
measured. When you play PCM sound tracks with a 96
kHz sampling frequency, the output signals from the
DIGITAL OUT (OPTICAL or COAXIAL) jack are
converted to 48 kHz sampling frequency.
Inputs and outputs
LINE IN 1 and LINE-2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jacks (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
x
ao
u163
y
i
http://www.xiaoyu163.com
SLV-D100
2 9
8
Refer to the SERVICE MANUAL of VHS MECHANI-
CAL ADJUSTMENT MANUAL VII for MECHANICAL
Q Q
3
6 7
ADJUSTMENTS. (9-921-790-11)
1 3
1 5

SPECIFICATIONS

LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
DIGITAL OUT
OPTICAL, Optical output jack
–18 dBm (wave length: 660 nm)
COAXIAL, phono jack
Output signal: 0.5 Vp-p, 75 ohms
COMPONENT VIDEO OUT (Y, Pb, Pr)
Phono jack
Y: 1.0 Vp-p/Pb, Pr: 0.7 Vp-p, 75 ohms
Timer section
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
8 programs (max.)
VIDEO CASSETTE RECORDER
co
.
9 4
2 8
RMT-V501
US Model
Canadian Model
TS-10 MECHANISM
0 5
8
2 9
9 4
2 8
General
Power requirements
120 V AC, 60 Hz
Power consumption
29 W
Operating temperature
0°C to 45°C (32°F to 113°F)
Storage temperature
–20°C to 60°C (– 4°F to 140°F)
Operating humidity
25% to 80%
Dimensions including projecting parts and controls
(w/h/d)
Approx. 430 × 100 × 330 mm
(Approx. 17 × 4 × 13 inches)
Mass
Approx. 4.5 kg (Approx. 9.9 lbs)
Supplied accessories
Remote commander (1)
Size AA (R6) batteries (2)
75-ohm coaxial cable with F-type connectors (1)
Audio/video cord (pinplug × 3 y pinplug × 3) (1)
Design and specifications are subject to change
without notice.

DVD PLAYER/

m
9 9
9 9

Advertisement

Table of Contents
loading

Related Manuals for Sony SLV-D100

Summary of Contents for Sony SLV-D100

  • Page 1: Specifications

    SLV-D100 3 7 63 1515 0 RMT-V501 SERVICE MANUAL US Model Canadian Model TS-10 MECHANISM Refer to the SERVICE MANUAL of VHS MECHANI- CAL ADJUSTMENT MANUAL VII for MECHANICAL L 13942296513 ADJUSTMENTS. (9-921-790-11) SPECIFICATIONS System LINE OUT General Audio characteristics...
  • Page 2 OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    http://www.xiaoyu163.com 3 7 63 1515 0 TABLE OF CONTENTS Precaution Schematic Diagrams Safety Precautions ·································································· 4 Block Identification of Main PCB ············································ 5-3 Handling the Optical Pick-up ················································ 6 S.M.P.S. ·············································································· 5-5 Pick-up Disassembly and Reassembly ·································· 7 Power Drive ········································································ 5-7 Function-Timer ···································································...

  • Page 4: Safety Precautions

    http://www.xiaoyu163.com 3 7 63 1515 0 Precautions 1 Safety Precautions 1. Be sure that all of the built-in protective devices are 5. With the unit completely reassembled, plug the AC line cord directly the power outlet. With the unit’s AC switch replaced.
  • Page 5 http://www.xiaoyu163.com 3 7 63 1515 0 12. Observe the original lead dress, especially near the following areas : Antenna wiring, sharp edges, and especially the AC and high voltage power supplies. Always inspect for pinched, out-of-place, or frayed wiring. Do not change the spacing between components and the printed circuit board.

  • Page 6: Handling The Optical Pick-Up

    http://www.xiaoyu163.com 3 7 63 1515 0 2 Handling the Optical Pick-up The laser diode in the optical pick up may suffer electrostatic WRIST-STRAP FOR GROUNDING breakdown because of potential static electricity from clothing and your body. The following method is recommended. THE UNIT (1) Place a conductive sheet on the work bench (The black sheet used for wrapping repair parts.)

  • Page 7: Pick-Up Disassembly And Reassembly

    http://www.xiaoyu163.com 3 7 63 1515 0 3 Pick-up Disassembly and Reassembly 3-1 Disassembly 3-2 Assembly 1) Remove the power cord. 1) Replace the Pick-up. 2) Disassemble the Deck-Assy. 2) Remove the soldering 2 points on Pick-up. 3) Make solder land 2 points short on Pick-up. 3) Reassemble the Deck-Assy.

  • Page 8: General

    • If you enter a new code number, the code number previously entered will be erased. The remote commander is preprogramed to control non-Sony TVs. If your TV is • If the TV uses a different remote control system from the one programed to work with the listed in the following table, set the appropriate manufacturer’s code number.
  • Page 9 AUDIO • Be sure you make connections firmly. Loose connections may cause picture distortion. • If your TV does not match any of the examples provided, see your nearest Sony dealer or qualified technician. Video cord (not supplied) Audio cord (not supplied) Caution Connections between the DVD-VCR’s VHF/UHF connector and the antenna terminals of the...
  • Page 10 http://www.xiaoyu163.com 3 7 63 1515 0 Hookup 2 : DVD-VCR setup Hookup 2 (Plug and Play) Plug the DVD-VCR into an AC outlet. You have no cable box, or a cable box with only a few The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels scrambled channels when the DVD-VCR is plugged into the AC outlet.
  • Page 11 http://www.xiaoyu163.com 3 7 63 1515 0 Press V/v to select “Auto”, then press CLOCK SET/ADJUST Step 5 : Setting the clock ENTER. Clock data CH: Auto Time zone: Auto ENTER Daylight saving: Auto Using the Auto Clock Set feature SET UP RETURN Some TV and cable channels transmit time Press V/v to select the item you want.
  • Page 12 http://www.xiaoyu163.com 3 7 63 1515 0 Press V/v to select “Ant/Cable.” Step 6 : Presetting channels ENTER This DVD-VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and SET UP • To preset cable TV channels: unscrambled CATV channels 1 to 125.

  • Page 13: Basic Operations

    http://www.xiaoyu163.com 3 7 63 1515 0 Basic Operations Press H PLAY. Playing discs PLAY The disc tray closes and the DVD player starts playback. The display window shows the Depending on the disc, some operations may playback time. be different or restricted. Refer to the Depending on the disc, a menu operating instructions supplied with your may appear on the TV screen.

  • Page 14: Playing A Tape

    http://www.xiaoyu163.com 3 7 63 1515 0 Press H PLAY. Playing a tape PLAY The display window shows the playback time. Before you start ... When the tape reaches the end, • Turn on the DVD-VCR and your TV. it will rewind automatically. •...

  • Page 15: Recording Tv Programs Using The Timer

    http://www.xiaoyu163.com 3 7 63 1515 0 To watch another TV program while recording Press SP/EP to select the tape speed, SP or EP. SP / EP Press TV/VIDEO to display “TV” in the display window. EP (Extended Play) provides recording time three times as long as SP (Standard Play).

  • Page 16: Advanced Hookups

    http://www.xiaoyu163.com 3 7 63 1515 0 To stop recording Checking/changing/canceling timer To stop the DVD-VCR while recording, press SELECT VIDEO and then press x STOP. settings Daily/weekly recording In step 4 above, press v to select the recording pattern. Each time you press v, the indication changes as shown below.

  • Page 17: Dvd Settings And Adjustements

    http://www.xiaoyu163.com 3 7 63 1515 0 B Use this hookup if your A/V reciever has a Dolby Digital or DTS* decoder, a digital input jack and 6 speakers S-Video/Component Video hookup This connection will allow you to use the Dolby Digital or DTS decoder function of your AV amplifier (receiver).

  • Page 18: Screen Setup

    http://www.xiaoyu163.com 3 7 63 1515 0 Notes Press V/v to select the setup item from the displayed list: • If you select surround setting while playing a DVD, the player does not output Dolby Digital “Dolby Digital,” “DTS,” or “Audio DRC.” signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set ENTER “Dolby Digital”...

  • Page 19: Setting The Display Or Sound Track Language

    http://www.xiaoyu163.com 3 7 63 1515 0 • Black Level Setting the display or sound track You can enhance the black level by increasing the brightness and contrast when viewing DVDs. language The default setting is indicated in bold print. Increases the contrast. You can set various languages for the disc’s Stops the increase of the contrast.

  • Page 20: Dvd Additional Operations

    http://www.xiaoyu163.com 3 7 63 1515 0 Press V/v to select the level you want, then Press V/v/B/b to select (DVD Setup), DVD SETUP RATING LEVEL Level 8 Adult press ENTER. then press ENTER. DVD Menu English Level 7 Level 6 Audio Original ENTER...

  • Page 21: Displaying The Subtitle

    http://www.xiaoyu163.com 3 7 63 1515 0 Changing the angles Displaying the subtitle If various angles (multi-angles) for a scene If subtitles are recorded on the disc, you can SUBTITLE ANGLE change the subtitles or turn them on and off are recorded on the DVD, “ ”...

  • Page 22: Using Bookmarks

    http://www.xiaoyu163.com 3 7 63 1515 0 Playing in random order (Random play) Press REPEAT when the DVD player is in stop REPLAY/ You can shuffle the playback order of titles, REPEAT RANDOM mode. chapters, or tracks. Subsequent “shuffling” CLEAR may produce a different playing order. REPEAT Press B/b to select “PROGRAM”, then press PROGRAM 01...

  • Page 23: Changing The Sound

    http://www.xiaoyu163.com 3 7 63 1515 0 To cancel the bookmark Changing the sound Press CLEAR after step 3. To exit the Bookmark menu When playing a DVD recorded in multiple Press BOOKMARK. audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If To playback the scene where you insert a bookmark AUDIO the DVD is recorded with multilingual...

  • Page 24: Playing An Mp3 Audio Track

    http://www.xiaoyu163.com 3 7 63 1515 0 To change the album, press O RETURN. Playing an MP3 audio track album 1 1 album 1 2 album 2 RETURN track 1 3 album 3 You can play back DATA CDs (CD-ROMs/ CD-Rs/CD-RWs) recorded in MP3 (MPEG1 Audio Layer 3) format.

  • Page 25: Vcr Additional Operations

    http://www.xiaoyu163.com 3 7 63 1515 0 VCR Addtional Operations To return to the menu Press O RETURN. Setting the recording duration time To play using “MENU OFF” After you have started recording, you can Press MENU to select “MENU OFF.” have the VCR stop recording automatically z REC When “MENU OFF”...

  • Page 26: Adjusting The Picture

    http://www.xiaoyu163.com 3 7 63 1515 0 To search for the counter 0:00:00 point Adjusting the picture (tracking) To mark a point on the tape that you want to find later, reset the tape counter to “0:00:00.” The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape Although the VCR automatically adjusts the tracking counter.

  • Page 27: Additional Infomation

    http://www.xiaoyu163.com 3 7 63 1515 0 Additional Information Operation (when recording on this VCR) General setup information Before you start editing • Turn on the VCR and the TV and set it to the video channel. Changing setup options • Press INPUT SELECT or CH +/– to Press SET UP when the DVD player is in stop mode.
  • Page 28 • Re-connect the connecting cord securely. • The connecting cord is damaged. • The player is connected to the wrong input jack on the If you have any questions or problems not covered below, please consult your nearest Sony amplifier (receiver) (page 15). dealer.

  • Page 29: Index To Parts And Controls

    http://www.xiaoyu163.com 3 7 63 1515 0 Index to parts and controls Symptoms caused by contaminated video heads • Normal picture • Rough picture • Unclear picture • No picture (or Refer to the pages indicated in parentheses ( ) for details. black &...
  • Page 30 E CLEAR button (36) (41) (66) [for DVD] ZOOM button [for VIDEO] No function F SURROUND button (72) [for Sony TV only] MUTING button G SET UP button (21) W SP (Standard Play)/EP (Extended Play) H SUBTITLE/TIMER button (40) (63)

  • Page 31: Disassembly And Reassembly

    SLV-D100 3 7 63 1515 0 2. Disassembly and Reassembly 2-1 Cabinet and PCB 2-1-1 Cabinet Top Removal 2-1-3 Ass’y Front Panel Removal 1 REMOVE 3 SCREWS 1 RELEASE 4 HOOKS (Top View) Lift up the Cabinet Top in the direction of arrow.

  • Page 32: Chassis Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-1-5 Chassis Removal 4 REMOVE 3 SCREWS 3 REMOVE 2 SCREWS 2 REMOVE 2 SCREWS DVD-DECK 1 REMOVE CONNECTORS DVD MAIN PCB VCR MAIN PCB L 13942296513 Fig. 2-5 Shassis Removal 2-1-6 VCR Main PCB Removal 1 REMOVE 3 SCREWS When installing the ass'y full deck on the Main PCB, be sure to align the assembly point of mode switch.

  • Page 33: Dvd Deck

    http://www.xiaoyu163.com 3 7 63 1515 0 2-2 DVD Deck 2-2-1 Tray Disc Removal 1) Insert a Screw Driver 1 into Emergency Hole 2 and push the Slider Housing 3 in the direction arrow “A”. 2) When the Tray Disc 4 comes out a little, pull it in the direction arrow “B” by hand. 3) Pull the Tray Disc 4 to disassemble , while simultaneously pushing 2 Stoppers 5 (left, right) in the direction arrow “C”, “D”.

  • Page 34: Ass'y P/U Deck Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-2-2 Ass’y P/U Deck Removal 1) Disconnect DCN2 1, DCN2 2. 2) Lift down the Ass’y P/U Deck 3 while simultaneously pushing 2 Hooks 4, 5 in the direction of arrow “A”, “B”. 4 HOOK "A"...

  • Page 35: Housing Ass'y Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-2-3 Housing Ass’y Removal 1) Remove Belt 1. 2) Push the Hook 2 in the direction arrow “A” and lift up Pulley Gear 3. 3) Push the Slider Housing 5 in the direction arrow “B” and lift up the Gear Tray 4. 4) Lift up the Slider Housing 5.

  • Page 36: Sub Chassis Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-2-4 Sub Chassis Removal 1) Remove the Soldering of Motor Feed (+, - wire) 1. 2) Remove the 4 Screws 2. 3) Lift up the Ass’y Brkt Deck 3. 2 4 SCREWS 3 ASSY-BRKT DECK 1 SOLDERING OF MOTOR FEED (+, - WIRE) L 13942296513...

  • Page 37: Ass'y Brkt Deck Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-2-5 Ass’y Brkt Deck Removal 1) Remove Washer 1. 2) Remove Gear Feed B 2 , Gear Feed A 3. 3) Remove 2 Screws 4. 4) Remove Shaft Pick-Up 5 and Pick-Up Assy 6. 5) Remove 1 Screw 7.

  • Page 38: Circuit Board Locations

    http://www.xiaoyu163.com 3 7 63 1515 0 2-3 Circuit Board Locations DVD MAIN PCB VCR MAIN PCB L 13942296513 FUNCTION-TIMER PCB Fig. 2-12 Circuit Board Locations u163 2-8E http://www.xiaoyu163.com...

  • Page 39: Q Q

    SLV-D100 3 7 6 3 1 5 1 5 0 3. Block Diagram 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 3-2E http://www.xiaoyu163.com...

  • Page 40: Pcb Diagrams

    SLV-D100 3 7 6 3 1 5 1 5 0 4. PCB Diagrams 4-1 VCR Main - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3...

  • Page 41: Vcr Main

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 4-1 VCR Main COMPONENT SIDE 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...
  • Page 42 http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 CONDUCTOR SIDE 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 43: Dvd Main

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 4-2 DVD Main 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 44: Function-Timer

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 4-3 FUNCTION-Timer COMPONENT SIDE 1 3 9 4 2 2 9 6 5 1 3 CONDUCTOR SIDE w w w u 1 6 3 4-10E http://www.xiaoyu163.com...
  • Page 45 SLV-D100 3 7 6 3 1 5 1 5 0 5. SCHEMATIC DIAGRAMS Block Identification of Main PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3 VCR Main PCB 5-1 S.M.P.S.

  • Page 46: Block Identification Of Main Pcb

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 Block Identification of Main PCB VCR MAIN PCB 1 3 9 4 2 2 9 6 5 1 3 <Conductor Side> <Component Side> DVD MAIN PCB w w w u 1 6 3 <Component Side>...
  • Page 47 http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-1 S.M.P.S. 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 48: Power Drive

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-2 Power Drive 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 http://www.xiaoyu163.com...

  • Page 49: Function-Timer

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-3 Function-Timer 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-10 http://www.xiaoyu163.com...

  • Page 50: Logic

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-4 Logic 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-11 5-12 http://www.xiaoyu163.com...

  • Page 51: A/V

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-5 A/V 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-13 5-14 http://www.xiaoyu163.com...

  • Page 52: Hi-Fi/Mts

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-6 Hi-Fi/MTS 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-15 5-16 http://www.xiaoyu163.com...

  • Page 53: Input-Output

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-7 Input-Output 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-17 5-18 http://www.xiaoyu163.com...

  • Page 54: Dvd Main-Micom/Av Decoder

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-8 DVD Main-Micom/AV Decoder 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-19 5-20 http://www.xiaoyu163.com...

  • Page 55: Dvd Servo

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-9 DVD Servo 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-21 5-22 http://www.xiaoyu163.com...

  • Page 56: Dvd Audio/Video

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5-10 DVD Audio/Video 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 5-23 5-24E http://www.xiaoyu163.com...

  • Page 57: Vcr Alignment And Adjustments

    SLV-D100 3 7 63 1515 0 6. VCR Alignment and Adjustments 6-1 Reference 1) X-Point (Tracking center) adjustment, “Head switching adjustment” can be adjusted with remote control. 2) When replacing the VCR Main PCB Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the “Head switching adjustment”.

  • Page 58: Test Location For Adjustment Mode Setting

    http://www.xiaoyu163.com 3 7 63 1515 0 6-1-2 TEST Location for Adjustment Mode Setting Short-Circuit for a second and release. L 13942296513 Fig. 6-2 Function-Timer PCB (Top View) u163 http://www.xiaoyu163.com...

  • Page 59: Mechanical Adjustment

    http://www.xiaoyu163.com 3 7 63 1515 0 6-2 Mechanical Adjustment Note : Refer to the Mechanical Manual “TS-10 (P/N: 9-921-790-11) for the adjustment and confirmation of ass’y full deck. 6-2-1 The Number and Position of Test Point Test point : TP2 (Audio Output) TP3 (Envelope) TP4 (H‘D S/W-Trigger) TP5 (Control Pulse)

  • Page 60: Head Switching Point Adjustment

    http://www.xiaoyu163.com 3 7 63 1515 0 6-3 Head Switching Point Adjustment 1) Playback the alignment tape. 2) Momently short-circuit the test point on Function-Timer PCB with pincers to set the adjustment mode. (See Fig. 6-2) 3) Press the “SP/EP” button of remote control then adjustment is operated automatically. (See Fig. 6-1) L 13942296513 u163 6-4E...

  • Page 61: Troubleshooting

    SLV-D100 3 7 63 1515 0 7. Troubleshooting L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 62 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 63 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 64 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 65 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 66 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 67 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 68 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 69 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 70 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-10 http://www.xiaoyu163.com...
  • Page 71 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-11 http://www.xiaoyu163.com...
  • Page 72 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-12 http://www.xiaoyu163.com...
  • Page 73 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-13 http://www.xiaoyu163.com...
  • Page 74 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-14 http://www.xiaoyu163.com...
  • Page 75 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-15 http://www.xiaoyu163.com...
  • Page 76 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-16 http://www.xiaoyu163.com...
  • Page 77 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-17 http://www.xiaoyu163.com...
  • Page 78 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-18 http://www.xiaoyu163.com...
  • Page 79 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 7-19E http://www.xiaoyu163.com...

  • Page 80: Repair Parts List

    SLV-D100 3 7 63 1515 0 8. Repair Parts List 8-1 Exploded Views - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...

  • Page 81: Exploded Views

    http://www.xiaoyu163.com 3 7 63 1515 0 8-1 Exploded Views NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark have some differences from the original one. in the exploded views are not supplied. dotted line with mark are critical for safety.

  • Page 82: Vcr Mechanical Parts (Top Side)

    http://www.xiaoyu163.com 3 7 63 1515 0 8-1-2 VCR Mechanical Parts (Top Side) not supplied supplied supplied supplied supplied not supplied supplied not supplied (OPTIONAL) supplied (OPTIONAL) L 13942296513 not supplied not supplied supplied not supplied supplied Ref. No. Part No. Description Remarks Ref.

  • Page 83: Vcr Mechanical Parts (Bottom Side)

    http://www.xiaoyu163.com 3 7 63 1515 0 8-1-3 VCR Mechanical Parts (Bottom Side) not supplied not supplied supplied L 13942296513 not supplied supplied not supplied supplied not supplied not supplied u163 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-075-259-01 SCREW CAP 2.6X6...

  • Page 84: Dvd Mechanical Parts

    http://www.xiaoyu163.com 3 7 63 1515 0 8-1-4 DVD Mechanical Parts not supplied not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 210 211 not supplied The components identified by mark dotted line with mark are critical for safety. Replace only with part number specified.

  • Page 85: Electrical Parts List

    http://www.xiaoyu163.com DVD MAIN 3 7 63 1515 0 8-2 Electrical Parts List NOTE: • Items marked “*” are not stocked since they are When indicating parts by reference number, • Due to standardization, replacements in the seldom required for routine service. Some delay please include the board name.
  • Page 86 http://www.xiaoyu163.com DVD MAIN FUNCTION-TIMER VCR MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-805-017-11 TRANSISTOR 200MW VCR MAIN BOARD, COMPLETE 1-805-018-11 TRANSISTOR KSR2103 ************************* 1-805-015-11 TRANSISTOR KSA812 AQ11 1-805-016-11 TRANSISTOR KSC1623-L 3-075-066-01 HOLDER-SENSOR AQ12...
  • Page 87 http://www.xiaoyu163.com VCR MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D804 1-804-407-11 DIODE IN4148 Q601 1-804-428-11 TRANSISTOR KSR1004 D813 1-804-407-11 DIODE IN4148 D814 1-804-407-11 DIODE IN4148 < PHOTO TRANSISTOR > LD601 1-804-438-11 LED-IR ZD1P01 1-804-414-11 DIODE ZENER UZP33B...
  • Page 88 http://www.xiaoyu163.com 3 7 63 1515 0 MEMO Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks L 13942296513 u163 8-9E http://www.xiaoyu163.com...
  • Page 89 SLV-D100 3 7 63 1515 0 L 13942296513 u163 Sony Corporation 2002I0500-1 Home Video Company 9-929-735-11 ©2002.9 — 114 — Published by Quality Assurance Dept. http://www.xiaoyu163.com...

Table of Contents