Enterasys 08H20G4-24 Hardware Installation Manual page 58

Installing and Connecting a Redundant Power System
Figure 2-24
Rackmount brackets (2)
1
2. With the mounting brackets attached, position the 08A-RPS-500 between the vertical frame
members of the 19-inch rack as shown in
the frame using four customer-supplied rack screws.
Figure 2-25
08A-RPS-500
1
2-30 Installation
Attaching the Rackmount Brackets
Fastening the 08A-RPS-500 to the Rack
Rails of 19-inch rack
2
M3 x 6 mm flathead screws (8)
2
Figure 2-25. Then fasten the 08A-RPS-500 securely to
3
Mounting screws