Figure 61 40G QSFP+/100G QSFP28 copper cable
1
(1) Connector
Figure 62 QSFP+ to 4 x SFP+ copper cable
1
(1) Connector for a QSFP+ port
(3) SFP+ side pull latch
NOTE:
• You can use a HPE X140 40G QSFP+ MPO SR4 or HPE X140 40G QSFP+ MPO MM 850nm
CSR4 300m transceiver module to connect a QSFP+ port to four SFP+ ports. The QSFP+
transceiver module and SFP+ transceiver modules to be connected must be the same in
specifications, including central wavelength and fiber type.
• As a best practice, use HPE transceiver modules and network cables for the switch. HPE
transceiver modules and network cables are subject to change over time. For the most
up-to-date list of HPE transceiver modules and network cables, contact Hewlett Packard
Enterprise Support or marketing staff.
• For more information about the transceiver modules and network cables, see HPE
Comware-Based Devices Transceiver Modules User Guide.
SFP28 port
The HPE 5950 48SFP28 8QSFP28 switch provides 48 SFP28 ports. The SFP28 ports support the
following transceiver modules and cables:
•
SFP28 transceiver modules in
•
SFP28 copper cables in
•
10-GE SFP+ transceiver modules in
2
2
Table
Table
30.
(2) Pull latch
(2) QSFP+ side pull latch
(4) Connector for an SFP port
29.
Table
17.
59
3
4