Sfp Port; Qsfp28 Port - HP FlexFabric 5950 Series Installation Manual

Product
Code
JD061A
JD062A
JD063B
NOTE:
• As a best practice, use HPE transceiver modules and network cables for the switch. HPE
transceiver modules and network cables are subject to change over time. For the most
up-to-date list of HPE transceiver modules and network cables, contact Hewlett Packard
Enterprise Support or marketing staff.
• For more information about HPE transceiver modules and network cables, see HPE
Comware-Based Devices Transceiver Modules User Guide.

SFP port

The HPE 5950 48SFP28 8QSFP28 and HPE 5950 4-slot switches each provide two SFP ports. You
can install FE SFP transceiver modules in
the SFP ports as needed.
IMPORTANT:
The SFP ports on the HPE 5950 48SFP28 8QSFP28 and HPE 5950 4-slot switches do not support
SFP-GE-T modules.

QSFP28 port

The HPE 5950 32QSFP28 and HPE 5950 48SFP28 8QSFP28 switches provide QSFP28 ports. You
can install the following transceiver modules and cables in the QSFP28 ports:
•
QSFP28 transceiver modules in
•
QSFP28 copper cables in
•
QSFP28 fiber cables in
•
QSFP28 to SFP28 copper cables in
•
QSFP+ transceiver modules in
•
QSFP+ copper cables in
•
QSFP+ fiber cables in
•
QSFP+ to SFP+ copper cables in
Central
wavelength
Description
(nm)
HPE X125 1G
SFP LC LH40
1310
1310nm
Transceiver
HPE X120 1G
SFP LC LH40
1550
1550nm
Transceiver
HPE X125 1G
SFP LC LH80 1550
Transceiver
Table
Table 23
Table
Table 27.
Fiber
diameter (µm)
9/125
9/125
9/125
Table 16 and GE SFP transceiver modules in
Table 21.
22.
Table 24.
Table 25.
26.
Table 28.
56
Multimode
Maximum
fiber modal
transmission
bandwidth
distance
(MHz*km)
N/A 40 km (24.86 miles)
N/A 40 km (24.86 miles)
N/A 80 km (49.71 miles)
Table 20 in