Ethernet Switch indicators
LED
10/100 Base-T port
XMT (upper LED)
LINK (lower LED)
Upper LED
Lower LED
190
Table 33 – LED Indications on Ethernet Switch
LED State/Color
Legacy
Green (On/Off)
Green (On/Off)
New Systems
Link / Yellow
Speed / Green
NOTE: These LEDs indicate activity on the communication port, they are
controlled by hardware (PHY chip), not by software.
HC900 Process & Safety Controller User and Installation Manual
Description
On while a message is being sent from the Main CPU;
otherwise Off.
On while the Main CPU is receiving a message.
Remains On as long as host is present; Off when the
host is removed from the link.
On while the as long as electrical connection host is
detected; Flashes during message transactions.
OFF for 10Base-T connections
ON for 100 Base-TX connections
Revision 6
21 April 2017