Honeywell HC900 User And Installation Manual page 104

Step
Install I/O modules in
9
racks. Be sure to follow
placement guidelines
under Heat Rise De-rating
page 52.
Install I/O module, install
10
appropriate terminal block.
In each slot location not
11
occupied by an I/O
module, install a Filler
Block cover, Part number
900TNF-0001.
90
Procedure
Note: The Filler Block Cover looks much like an I/O Terminal
Block assembly, except that it does not include the wire
terminating block (screw terminals). The Filler Block mounts in
the same manner as a Terminal Block (with captured screws at
top and bottom). Blank labels are provided for mounting in the
hinged door.
HC900 Process & Safety Controller User and Installation Manual
Comments Reference
Revision 6
21 April 2017