Dimensions; Led Status Indications - Honeywell INCOMM L510 User Manual

DIMENSIONS

LED STATUS INDICATIONS

Off: L510 is not powered.
On for 1/2 second, Off for 1/2 second, and repeating: L510 is powered but has not received a "Central Status Broadcast" and
does not think the room it is in is Online/connected with the Inncom server.
On for 1 second, Off for 1 second, and repeating: L510 is powered and has seen a "Central Status Broadcast" and does think the
room it is in is Online/connected with the Inncom server.
Eight blinks 1/2 second apart, followed by a very rapid blink for 4 seconds, followed by On for 1 second, Off for 1 second, and
repeating: The Bind/Service button was pressed, making the L510 send a Bind Request. The eight blinks indicate the L510
received a Bind Offer. It then RESETS, and on startup, it rapidly blinks the LED for 4 seconds.
On for 1 second, followed by very rapid blink for 4 seconds, followed by On for 1 second, Off for 1 second and repeating:
• The L510 just had power applied or was RESET.
• The Bind/Service button was pressed and the L510 has sent a Reverse Bind command but never received a Bind Offer.
INCOMM L510 LAMP CONTROLLER USER GUIDE
3
v1.5 October 26, 2022
31-00593-01