Sending A Server Fax - Xerox AltaLink C80 Series User Manual

Xerox Apps
®

Sending a Server Fax

If a fax server is connected to the network, you can send a document to a fax machine without requiring
a dedicated telephone line.
When using the server fax, a document is scanned and sent to a fax repository on the network. The fax
server then sends the fax over a telephone line to a fax machine.
The system administrator must enable the server fax service and configure a fax repository, or filing
location, before you can use this feature.
To send a server fax:
1. Load your original documents.
− For single pages or paper that cannot be fed using the duplex automatic document feeder, use
the document glass. Lift the duplex automatic document feeder, then place the original
document face down in the upper-left corner of the document glass.
− For multiple, single, or 2-sided pages, use the duplex automatic document feeder. Remove any
staples and paper clips from the pages. Insert the original documents face up in the duplex
automatic document feeder, with the top of the page entering the feeder first. Adjust the
paper guides so that they fit against the original documents.
2. At the printer control panel, press the Home button.
3. Touch Server Fax.
4. To clear previous App settings, touch Reset.
128 Xerox AltaLink
® ®
User Guide
C80XX Series Multifunction Printer