Xerox AltaLink C80 Series User Manual page 224

Maintenance
3. Check inside the finisher for any loose staples and remove them.
4. Pinch both sides of the staple pack and remove the staple pack from the cartridge.
5. Insert the front side of the new staple pack into the staple cartridge, then push the rear side into the
cartridge.
6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler until
it clicks.
7. Close the finisher front door.
224 Xerox AltaLink
® ®
User Guide
1
2
C80XX Series Multifunction Printer
2
1
1