Table of Contents
Advertisement
Testing Procedures
!
Oven Light Switch
The oven light switch is a single pole, single throw
rocker type switch mounted in the control panel. Follow
the procedures below to test the switch.
1. Turn off power to the range.
2. Disconnect the switch wire leads.
3. Attach an ohmmeter, set to the R x 1 scale, to the
switch terminals 1 and 2. When the switch is set to
the ON position, continuity should be indicated and
open contacts should be indicated when the switch
is set to the OFF position.
RS2310004 Rev. 1
WARNING
To avoid risk of electrical shock, personal injury or death,
disconnect power and gas supply before servicing,
unless testing requires it.
42
Advertisement
Table of Contents
