Sony LBT-ZX10D Operating Instructions Manual page 9

2 Connect the center speaker.
Connect the speaker cord to the SPEAKER
CENTER terminal on the unit and to the
terminal on the center speaker as shown in
"Tip" in step 1.
Green
3 Connect the surround speakers.
Connect the speaker cords to the
SPEAKER SURR terminals on the unit and
to the terminals on the surround speakers as
shown in "Tip" in step 1.
Grey
4 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
AM loop
antenna
Extend the FM lead
antenna horizontally
5 Connect the video input jack of your TV
When using a TV
Turn on the TV and select the video input so that
you can view the pictures from this system.
When connecting a video deck
Connect the video deck to the TV using audio
and video cords (not supplied). However, do not
connect this system to the TV through the video
deck. Otherwise, you may experience video
leakage when watching video from this system.
Blue
Connect this system directly to the TV as shown
below.
Video deck
Tip
For even higher quality video images:
– Use optional component video cords to connect the
COMPONENT VIDEO input jacks on your TV to
the COMPONENT VIDEO OUT jacks of this unit. If
your TV is compatible with progressive format file
signals, use this connection and set "COMPONENT
OUT" to "PROGRESSIVE" in "Adjusting the TV
screen" (page 32).
– You can use an optional S Video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack of this unit.
to the VIDEO OUT jack with the
supplied video cord.
V I D E O
TV
Do not connect
directly
S V I D E
O U T
O
O U T
System
continued
9 GB