Changing The Spectrum Analyzer Display; Adjusting The Brightness Of The Display - Sony LBT-ZX10D Operating Instructions Manual

Changing the spectrum
analyzer display
1
Press AMP MENU on the unit
repeatedly to select "SPECTRUM".
The last selected spectrum setting appears
in the display.
2
B b
Press or repeatedly to select the
settting you want.
The display changes as follows:
T
SPECTRUM 1
Y
SPECTRUM OFF
R
SPECTRUM 4
t
When X-ROUND mode is selected
The display changes as follows:
X-POSITION* y SPECTRUM OFF
*
The spectrum analyzer display will synchronize with
the selected X-ROUND effect.
3
Press ENTER.
t
SPECTRUM 2
Y
SPECTRUM 3
R
T
Adjusting the brightness
of the display
1
Press AMP MENU on the unit
repeatedly to select "DIMMER".
The last selected dimmer setting appears in
the display.
2
B b
Press or repeatedly to select the
setting you want.
The display changes as follows:
t y
DIMMER 1
t
DIMMER 3*
* DIMMER 3 is the darkest.
3
Press ENTER.
T
DIMMER 2
T
61 GB