Sony LBT-ZX10D Operating Instructions Manual page 74

The JPEG image file cannot be played back.
• Recording was not performed according to ISO
9660 Level 1, Level 2 or Joliet in expansion
format.
• The JPEG image file does not have the extension
".JPG" or ".JPEG".
• The data is not stored in JPEG format.
• Length or width of image is more than 4720 dots.
• Select "CUSTOM SETUP" from the setup items.
Then select "DATA CD PRIORITY" and set to
"JPEG" (page 31).
• The JPEG image files in progressive format is not
supported.
• The system can playback to a depth of 8 folders
only.
• JPEG image files with a high width to length ratio
cannot be played back.
• The disc contains more than 99 albums.
• The album contains more than 250 tracks.
The disc title, album title, track title, ID3 tag,
CD-TEXT and DVD-TEXT characters do not
appear properly.
• Use a disc that conforms with ISO 9660 Level 1,
Level 2, or Joliet in the expansion format.
• The ID3 tag is not version 1.0 or version 1.1.
• The character code that can be displayed by this
system are as follows.
– Upper cases (A to Z)
– Lower cases (a to z)
– Number (0 to 9)
– Symbols (< > *, – / [ ] \ _)
Other characters may not be displayed correctly.
The surround effect is difficult to hear when
you playback a Dolby Digital or MPEG audio
sound track.
• Make sure the sound field is set properly
(page 50).
• Check the speaker connections and settings (pages
8 and 38).
• Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo, even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo effect when you
playback an audio CD, VIDEO CD, MP3 audio
tracks or DVD.
• Select "KARAOKE OFF".
• Make sure the system is connected properly.
74 GB
Picture
There is no picture.
• Press FUNCTION +/– (or FUNCTION on the
unit) repeatedly until "DVD" appears in the
display.
• Check that the system is connected securely.
• The video cord is damaged. Replace it with a new
one.
• Make sure you connect the unit to the video input
jack of your TV (page 9).
• Make sure you turn on the TV and operate the TV
correctly.
• You have set "COMPONENT OUT" in
"SCREEN SETUP" to "PROGRESSIVE" even
though your TV cannot accept the signal in
progressive format. In this case, press x (DVD)
and DVD MENU on the unit simultaneously (see
page 34).
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
• Make sure you set the color system correctly,
according to your TV color system.
• Make sure Game Mixing is canceled.
• Make sure you connect the unit and your TV using
only the supplied video cord.
Picture noise appears.
• Clean the disc.
• If video signal from your unit has to go through
your VCR to your TV, the copy-protection
applied to some DVD programs could affect
picture quality. If you still experience problems
after checking your connections, please try to
connect your unit directly to your TV's S Video
input (page 9).
• Set the color system to match your TV (page 34).
The aspect ratio of the TV screen cannot be
changed even though you can set "TV TYPE"
in "SCREEN SETUP" in the Setup Menu when
you play a wide picture.
• The aspect ratio is fixed on your DVD.
• If you connect the unit with the S Video cord,
connect directly to the TV. Otherwise, you may
not change the aspect ratio.
• Depending on the TV, you may not change the
aspect ratio.
Messages do not appear on the TV screen in
the language you want.
• Select the language you want for the on-screen
display in "OSD" under "LANGUAGE SETUP"
in the Setup Menu (page 29).