Table of Contents
Advertisement
Chapter 5 The LAN Configuration Screens
Table 12 ADVANCED > LAN Configuration> IP Alias (continued)
LABEL
RIP Version
IP Alias 2
IP Alias 2
IP Address
IP Subnet
Mask
RIP
Direction
RIP Version
Apply
Reset
48
DESCRIPTION
Select which version of RIP the MAX-207HW2R uses when it sends or
receives information on the subnet.
•
RIP-1 - The MAX-207HW2R uses RIPv1 to exchange routing
information.
•
RIP-2B - The MAX-207HW2R broadcasts RIPv2 to exchange routing
information.
•
RIP-2M - The MAX-207HW2R multicasts RIPv2 to exchange routing
information.
Select this to add the specified subnet to the LAN port.
Enter the IP address of the MAX-207HW2R on the subnet.
Enter the subnet mask of the subnet.
Use this field to control how much routing information the MAX-
207HW2R sends and receives on the subnet.
•
None - The MAX-207HW2R does not send or receive routing
information on the subnet.
•
Both - The MAX-207HW2R sends and receives routing information
on the subnet.
•
In Only - The MAX-207HW2R only receives routing information on
the subnet.
•
Out Only - The MAX-207HW2R only sends routing information on
the subnet.
Select which version of RIP the MAX-207HW2R uses when it sends or
receives information on the subnet.
•
RIP-1 - The MAX-207HW2R uses RIPv1 to exchange routing
information.
•
RIP-2B - The MAX-207HW2R broadcasts RIPv2 to exchange routing
information.
•
RIP-2M - The MAX-207HW2R multicasts RIPv2 to exchange routing
information.
Click to save your changes.
Click to restore your previously saved settings.
MAX-207HW2R User's Guide
Advertisement
Table of Contents
