ZyXEL Communications MAX-207HW2R User Manual page 91

Note: If you have a private WAN IP address, then you cannot use Dynamic DNS.
Click ADVANCED > System Configuration > Dynamic DNS to set up the MAX-
207HW2R as a dynamic DNS client.
Figure 36 ADVANCED > System Configuration > Dynamic DNS
The following table describes the labels in this screen.
Table 32 ADVANCED > System Configuration > Dynamic DNS
LABEL
Dynamic DNS Setup
Enable Dynamic
DNS
Service
Provider
Dynamic DNS
Type
Host Name
User Name
Password
Enable Wildcard
Option
Enable offline
option (Only
applies to
custom DNS)
IP Address Update Policy
Use WAN IP
Address
MAX-207HW2R User's Guide
DESCRIPTION
Select this to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic
DNS service provider.
Enter the host name. You can specify up to two host names, separated
by a comma (",").
Enter your user name.
Enter the password assigned to you.
Select this to enable the DynDNS Wildcard feature.
This field is available when CustomDNS is selected in the DDNS Type
field. Select this if your Dynamic DNS service provider redirects traffic
to a URL that you can specify while you are off line. Check with your
Dynamic DNS service provider.
Select this if you want the MAX-207HW2R to update the domain name
with the WAN port's IP address.
Chapter 9 The System Configuration Screens
91