Table of Contents
Advertisement
Table 46 VOICE > Phone Book > Call Forward Policy
LABEL
No Answer
Waiting Time
Advanced Setup - Incoming Call Policy
#
Activate
Incoming Call
Number
Forward to
Number
Condition
Apply
Reset
Note: The MAX-207HW2R checks the Advanced rules first before checking the
Forward to Number rules. All rules are checked in order from top to bottom.
MAX-207HW2R User's Guide
DESCRIPTION
This field is used by the No Answer Forward to Number feature and
No Answer conditions below.
Enter the number of seconds the MAX-207HW2R should wait for you to
answer an incoming call before it considers the call is unanswered.
The number of the item in this list.
Select this to enable this rule. Clear this to disable this rule.
Enter the phone number to which this rule applies.
Enter the phone number to which you want to forward incoming calls
from the Incoming Call Number. You may leave this field blank,
depending on the Condition.
Select the situations in which you want to forward incoming calls from
the Incoming Call Number, or select an alternative action.
•
Unconditional - The MAX-207HW2R immediately forwards any calls
from the Incoming Call Number to the Forward to Number.
•
Busy - The MAX-207HW2R forwards any calls from the Incoming
Call Number to the Forward to Number when your SIP account
already has a call connected.
•
No Answer - The MAX-207HW2R forwards any calls from the
Incoming Call Number to the Forward to Number when the call
is unanswered. (See No Answer Waiting Time.)
•
Block - The MAX-207HW2R rejects calls from the Incoming Call
Number.
•
Accept - The MAX-207HW2R allows calls from the Incoming Call
Number. You might create a rule with this condition if you do not
want incoming calls from someone to be forwarded by rules in the
Forward to Number section.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 12 The Phone Book Screens
123
Advertisement
Table of Contents
