Table of Contents
Advertisement
Chapter 5 The LAN Configuration Screens
Note: This screen has no effect if the DHCP server is not enabled. You can enable it
in ADVANCED > LAN Configuration > DHCP Setup.
Figure 13 ADVANCED > LAN Configuration > Static DHCP
The following table describes the labels in this screen.
Table 11 ADVANCED > LAN Configuration > Static DHCP
LABEL
#
MAC Address
IP Address
Apply
Reset
46
DESCRIPTION
The number of the item in this list.
Enter the MAC address of the computer to which you want the MAX-
207HW2R to assign the same IP address.
Enter the IP address you want the MAX-207HW2R to assign to the
computer.
Click to save your changes.
Click to restore your previously saved settings.
MAX-207HW2R User's Guide
Advertisement
Table of Contents
