ZyXEL Communications MAX-207HW2R User Manual page 81

Table 27 ADVANCED > WAN Configuration > WiMAX FC Table (continued)
LABEL
Bandwidth (KHz)
RSSI (dBm)
CINR (dB)
Apply
Reset
MAX-207HW2R User's Guide
DESCRIPTION
This field shows the bandwidth of the base station in kilohertz (kHz).
This field shows the Received Signal Strength Indication. This value
is a measurement of overall radio signal strength. A higher RSSI
level indicates a stronger signal, and a lower RSSI level indicates a
weaker signal.
A strong signal does not necessarily indicate a good signal: a strong
signal may have a low signal-to-noise ratio (SNR).
This field shows the average Carrier to Interference plus Noise Ratio
of the current connection. This value is an indication of overall radio
signal quality. A higher value indicates a higher signal quality, and a
lower value indicates a lower signal quality.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 7 The WAN Configuration Screens
81