ZyXEL Communications MAX-207HW2R User Manual page 27

The following table describes the labels in this screen.
Table 4 Main
LABEL
Logout
WiMAX Connection
Status
Software Version
WiMAX Firmware
Version
Version Date
System Uptime
Note: For security reasons, the MAX-207HW2R automatically logs you out if you do
not use the web configurator for five minutes. If this happens, simply log in
again.
MAX-207HW2R User's Guide
Chapter 2 Introducing the Web Configurator
DESCRIPTION
Click to log out of the Web Configurator.
Note: This does not log you off the WiMAX network, it simply
logs you out of the MAX-207HW2R's browser-based
configuration interface.
This field indicates the current status of your WiMAX connection.
Status messages are as follows:
• Connected - Indicates that the MAX-207HW2R is connected
to the WiMAX network. Use the Strength Indicator icon to
determine the quality of your network connection.
• Disconnected - Indicates that the MAX-207HW2R is not
connected to the WiMAX network.
• DL_SYN - Indicates a download synchronization is in
progress. This means the firmware is checking with the
server for any updates or settings alterations.
This field indicates the version number of the MAX-207HW2R's
firmware. The version number takes the form of: Version
(Build),release status (candidate) | Version Release Date.
For example: V3.60(BCC.0)c4 | 07/08/2008 indicates that the
firmware is 3.60, build BCC.0, candidate4, released on July 08,
2008.
This field displays the version number of the chip firmware used
in this MAX-207HW2R.
This field indicates the exact date and time the current firmware
was compiled.
This field indicates how long the MAX-207HW2R has been on.
This resets every time you shut the device down or restart it.
27