ZyXEL Communications MAX-207HW2R User Manual page 86

Chapter 8 The Port Configuration Screens
activate, and deactivate each one. You can also set up a default server to handle
ports not covered by rules.
Figure 34 ADVANCED > NAT Configuration > Port Forwarding
The following table describes the icons in this screen.
Table 29 ADVANCED > NAT Configuration > Port Forwarding
ICON
The following table describes the labels in this screen.
Table 30 ADVANCED > NAT Configuration > Port Forwarding
LABEL
Default Server Setup
Default Server
Port Forwarding
#
Active
86
DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
DESCRIPTION
Enter the IP address of the server to which the MAX-207HW2R should
forward packets for ports that are not specified in the Port Forwarding
section below or in the TOOLS > Remote MGMT screens. Enter
0.0.0.0 if you want the MAX-207HW2R to discard these packets instead.
The number of the item in this list.
Select this to enable this rule. Clear this to disable this rule.
MAX-207HW2R User's Guide