ZyXEL Communications MAX-207HW2R User Manual page 40

Chapter 4 The Status Screen
Table 9 Advanced > Status (continued)
LABEL
Device Information
System Name
Software
Version
Bootbase
Version
Kernel Version
WAN Information
IP Address
IP Subnet Mask
DHCP
LAN Information
IP Address
IP Subnet Mask
DHCP
WiMAX Information
CINR Mean
CINR Deviation
40
DESCRIPTION
This field displays the MAX-207HW2R system name. It is used for
identification.
This field displays the current firmware version inside the device.
You can change the firmware version by uploading new firmware in
ADVANCED > System Configuration > Firmware.
This field displays the current bootbase version inside the device.
This field displays the current kernel version inside the device.
This field displays the current IP address of the MAX-207HW2R in the
WAN.
This field displays the current subnet mask on the WAN.
This field displays what DHCP services the MAX-207HW2R is using in
the WAN. Choices are:
Client - The MAX-207HW2R is a DHCP client in the WAN. Its IP
address comes from a DHCP server on the WAN.
None - The MAX-207HW2R is not using any DHCP services in the
WAN. It has a static IP address.
This field displays the current IP address of the MAX-207HW2R in the
LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the MAX-207HW2R is providing
to the LAN. Choices are:
Server - The MAX-207HW2R is a DHCP server in the LAN. It assigns
IP addresses to other computers in the LAN.
Relay - The MAX-207HW2R is routing DHCP requests to one or more
DHCP servers. The DHCP server(s) may be on another network.
None - The MAX-207HW2R is not providing any DHCP services to
the LAN.
You can change this in ADVANCED > LAN Configuration > DHCP
Setup.
This field shows the average Carrier to Interference plus Noise Ratio of
the current connection. This value is an indication of overall radio signal
quality. A higher value indicates a higher signal quality, and a lower
value indicates a lower signal quality.
This field shows the amount of change in the CINR level. This value is
an indication of radio signal stability. A lower number indicates a more
stable signal, and a higher number indicates a less stable signal.
MAX-207HW2R User's Guide