Crankcase Breather; Final Drive Oil - Honda Goldwing GL1100 Aspencade 1982 Owner's Manual

CRANKCASE BREATHER
1. Loosen the lower clamp of the trans-
parent tube. Remove the storage tank
mounting bolt and the storage tank
(l).
2. Empty the deposits.
3. Install the tank.
NOTE:
... Service more frequently when ridden in
rain or at full throttle, or service if the
deposit level can be seen in the trans-
parent section of the drain tube.
78
(1) Storage tank
FINAL DRIVE OIL
Change the oil when specified by the
maintenance schedule.
NOTE: "
" Change the oil with the final drive
warm and the motorcycle on its center
stand to assure complete and rapid
draining.
To drain the oil, remove the oil filler
cap (I) and drain plug (2).
2. After the oil has completely drained.
check that the sealing washer (3) on
the drain plug is in good condition and
install the drain plug.
Drain Plug Torque:
10-14 N·m (1.0-1.4 kg-m,
7-10 ft-Ib)
3. Fill the final drive with approximately
ISO cc (5.1 oz) of the recommended
oil.
Make sure the recommended oil has
filled up to the lower edge of the
inspection hole (4).
4. Install the oil filler cap.
4
(l) Oil idler cap
(2) Oil drain plug
(3) Sealing washer
(4) Inspection hole
79