Honda Goldwing GL1100 Aspencade 1982 Owner's Manual page 17

Motorcycle Radio
The radio can be used with the ignition
switch at ACC, ON or P.
Power Switch/Volume Control Knob 0):
When this knob is turned clockwise, the
power goes on. Turn it further to adjust
the volume.
Tone Control Knob (2);
Turning this knob clockwise emphasized
treble. turning it counterclockwise empha-
sized bass.
26
Manual Search UP Button/Clock Minute
Adjust (3);
The frequency display moves up the scale
when this button is pressed. Release the
button to stop at a selected frequency.
This button is also used to set the Minutes
'on the clock.
Manual Search DOWN Button/Clock Hour
Adjust (4):
The frequency display moves down the
scale when this button is pressed. Release
the button to stop at a selected frequency.
This button is also used to set the Hours on
the clock.
(I)
Power switchNolume control knob
(2) TOne control knob
(3) Manual search up button/Clock Minute
Adjust
(4) Manual search DOWN bu tton/Clock
Hour Adjust
(5) Memory button/Clock adjust
(6) Preset buttons
(7) Clock button
(8) AM/FM/Local Band Switch
Memory Button (5);
This button is used to memorize a tuned
station's location or to set the clock's
time.
To use 'memory, tune the radio to the
desired station; and press the memory
button (5). then press one of the preset
buttons (6); the station
will
be memorized
on that preset button.
Preset Buttons (6);
You can preset four AM stations and four
FM stations. AM stations are preset with
the AMjFM ba~d switch turned to AM,
and FM stations are preset with the same
switch turned to FM.
Clock Bulton (7);
This button, when pressed will display
the time with the ignition or radio power
switch at ON or OFF.
To adjust the clock, press the clock button
(7) to display time. Press and hold the
memory button (5) while setting the
minutes (manual search UP button 3)
and hours (manual search
DOWN
button
4). Release the memory button and the
time is set.
AMjFMjLocal Band Switch (8);
This switch can be set to AM.Local, AM,
FM or FM'Local. Set the AM-FM band
switch to local for best reception of strong
AM or FM signals. If the Local indicator
light does not light, switch to the AM or
FM position to receive stations with weak
or distant signals.
27