Configuration Screens - Fluke 39 User Manual

39/41B
Users Manual
3. To exit the screen, press
and store all selections you have made during this configuration session.
The Tester begins normal operation using these selections. The Tester
also automatically sets up to these selections at the next power-up.
To exit the screen without making changes, press
all selection lines.
4. To restore the standard configuration, press
(On Model 41B, this action also clears waveform memory.)
Figure 17. Configuration Screens
38
E
to select a highlighted item on the last line
R
E
to cycle through
O
as you press on.
a16c.eps