Printing (Model 41B); Sending To A Printer Or Pc (Model 41B); Using Pc Software With The Tester (Model 41B) - Fluke 39 User Manual

p

Printing (Model 41B)

p
Pressing sends data for the present screen to a printer. Printer type
compatibility is selected on the configuration screen as Epson or HP .
The Tester displays PRNT and the following message appears:
PRESS ANY KEY TO STOP
Press any key to abort printing; all keys then return to their normal functions.
s

Sending to a Printer or PC (Model 41B)

s
Press to start outputting calculated results to the printer or PC. Model
41B stops outputting after it has sent a single set of calculated results. At
9600 baud, the Tester requires a few seconds to output a typical set of
calculated values (1120 bytes).
p
Do not press
software. In either case, pressing
communications.

Using PC Software with the Tester (Model 41B)

FlukeView 41 software is provided for Windows. Refer to the operating
instructions provided with the software.
* PRINTING
s
Note
p
or while printing or using FlukeView 41
or
Printing (Model 41B)
*
s
disrupts
43