Special Messages - Fluke 39 User Manual

39/41B
Users Manual
< >
Press or to adjust contrast. Press
store current setting.
The Tester has detected a calibration error at power-up. Since erroneous
readings result, the Tester displays this message until calibration is verified.
Return the Tester to a Service Center for repair or calibration. See "User
Maintenance" later in this manual.
R
In Record, averaging stops after 48 hours. Note the average value shown;
then, press once to return to normal operation or twice to begin
recording with new values.
PRESS ANY KEY TO STOP
On Model 41B, this message appears when you press
any key to resume normal operation.
24
Table 4. Special Messages
C
<CONTRAST>
* CALIBRATION ERROR *
CONTACT FLUKE SERVICE
STOP AVG AT 48 HOURS
* PRINTING
to exit contrast control and
*
p s
or . Press